Developed for ease and assurance in placing of elastic ligatures. Precision tips and locking handles provide a positive, no slip grip.

These do not have a notched end.

Precision tips for accurate wire and clasp adjusting and contouring. Also an excellent plier for bending of orthopedic appliances. Superior strength for wires up to .030

 The ALF instrument is a specialized multipurpose instrument with 5 functions.
The Alpha Tip can be used for several different uses and it has 3 different parts to it, there is a push tip for placing, seating and dislodging the appliances from under the composite ledges. The hook helps to remove the appliance, and the hook and tip is used to bend the omega loops away from the gingival. The Sharp tip is an elastic director and remover to ligate the posterior body to the sheaths on band with .150 elastics.
The Omega Tip has a c-crescent designed to build composite ledges on the canines and 1st pre-molars.

 The groove firmly holds the A.L.F appliance while the appliance is being adjusted/activated.

Efficient utility plier with serrated beaks for a firm grip. 45 degree angled tips to access hard to reach areas, when placing archwires

Special design makes 1mm “V” bends to shorten archwires or provide a positive stop. Excellent for placing stops in Nitanium wires. For round or rectangular wires up to .019” x .025”.

The Baker Lingual Bar Plier was developed to assist dentists in the placement of bondable lingual bar retainers after the completion of orthodontic therapy

Crimps and reforms bands with ease and accuracy; allowing better adaptation to tooth.

Versatile plier for working with round wire up to .030”. Round and pyramid beaks are smooth to prevent wire scoring. Can also be used to form springs.

Stainless steel holder designed for accurate placement of anterior and posterior direct bond brackets and buccal tubes. Excellent field of vision.

Simplifies bracket positioning. Place gauge on the incisal occlusal surface of tooth to simplify bracket positioning. Solid stainless steel for lasting durability.

Measures 3.5mm, 4.0mm, 4.5mm and 5.0mm.

Precision stainless steel instrument uses reciprocal plier action to shear off the temporary cap on a convertible first molar buccal tube.

Replacement blades for buccal tube converting plier.

Full stainless steel construction. One end is cement mixing spatula, other end is designed for placing cement in preformed bands.

This tool is ideal for opening and closing your self-ligating brackets and minimizes the chance of any breakages

A device used to trace Bimler and Sassouni Analysis

 Developed for ease and assurance in placing of elastic ligatures. Precision tips and locking handles provide a positive, no slip grip.

Designed to fit the unique shape of all DELTA FORCE Brackets. Notched on each side of the tip captures the angles on the bracket body just under the occlusal tie wings. This holds the bracket securely, without shifting, or risk of popping out. Tweezers tips rest just above the base flange, providing a firm surface to push against while seating the bracket. The reverse end of this tool has a narrowed tip that can be placed in the archwire slot for aligning and adjustin.
Stainless steel holder designed for accurate placement of anterior and posterior direct bond brackets and buccal tubes.

? Excellent field of vision.
? Notched for use with delta force brackets.

Essential for measuring cross arch width interorally or on your study casts. Easy to use, sturdy, and dependable. The slide moves smoothly and easily, yet hold its position when released to maintain accurate measurements. The tips are curved and precision shaped to confidently locate and hold points for measurement. The front and back are marked with scales; both marked in millimeters up to 80mm, with large marks and numbers to denote every 10 millimeters.

Dimple pliers can be used to introduce a small dimple on clear aligners to help with retention and or rotations.
Please see our help sheet in the download section (under Laboratory/downloads) for more information.

Designed for long life and ease in removing direct bond brackets. The 60° angle allows access to anterior and posterior. The tips wedge between edges of bracket base and tooth surface. Lifting brackets off with no stress. Excellent for both stainless steel and cosmetic brackets, anterior and posterior.

Step down bends intraorally with fixed wire.

(Double Sided) Design features ligature tie-slip tip on one end; ligature tucking on other end. All stainless steel construction.

Angulated beaks for accessibility, ease and accuracy. Grooved beaks assure positive hold for positioning elastics.

Stubby, square beaks; .045" at tip and parallel at 1mm opening. Easily bends and forms wire up to .060 to .050

The extra strong edges make it one of the most popular hard wire cutters. Designed to cut all sizes and types of archwires, it features a 15 degree cutting angle for easy intraoral access. (Cuts stainless steel wire up to .036”).

Precision-ground serrated tips assure a firm, positive grip that will last for years.

Precision stainless steel IPR Leaf Gauge for accurate measurement when creating space between teeth.

6 piece set, labelled and notched for easy identification in the following sizes - .1mm, .15mm, .2mm, .25mm, .3mm,?.5mm.

Autoclavable

Excellent for precise bending and forming loops in light wires up to .020”. Also used to adjust springs on orthopaedic appliances. No splay because of fine serrations of square beaks; assuring firm grip.

Round and concave beaks are hardened stainless steel and have fine, smooth finish. Bends round or rectangular wire with firm grip but will not nick wire. Bends larger radius in wire. Up to .032

Double ended explorer for ease of ligature elastic removal. Special tempered tips

 Precision tips, non slip grip and operator friendly. Smooth glide spring for consistent opening and closing.

Available in:

• Narrow tip
• Notched tip
• 1/2 Fine tip

For quick, precise placement of elastomeric ligature modules. With locking, quick-release Mathieu type handles, sure-grip beaks, and hook up.

Precision tips, non-slip grip, and operator friendly. Smooth glide spring for consistent opening and closing

Multi – purpose seater with hardened stainless steel tip, moulded handle also serves as a bite stick. Sterilizable and auto clavable.

Removes convertible caps from first molar buccal tubes. Insert tip into mesial opening of tube and use lever action to peel off cap.

(Includes 3 replacement tips.)

Molar cap removing blades (6)

Smooth working area is ideal for forming and contouring archwires. Useful in placing accentuated curves in archwires. Excellent plier for forming of Nitanium archwires.

This Orthometer symmetry grid allows for clearer model analysis. Extramely useful in determining uni-lateral arch length loss.

This cutter’s super-sharp, diamond honed edges are effective for cutting all soft wires, pins, and elastics up to .016” diameter. 15 degree cutting angle.

Not to be used on hard wire.

Thermally activated archwires can be chilled easily, quickly and intraorally for easy placement of specific and difficult bends. The Polar Bear can be heat or cold sterilized.

Safely and quickly removes posterior bands. Pad rests on occlusal surface and tip catches edge of band. Tips may be heat sterilized.

Replacement Tips (3 per pack) sold separately.

3 Replacement tips per pack

DISTAL END CUTTER SAFETY HOLD. A precision cutter designed for distal arch cutting. It shear cuts hard wires and holds the loose distal end preventing any damaging of oral tissue. Caution: Maximum capacity archwires up to .022" x .026". Rectangular or round wires up to .020".

The Schwarz-Korkhaus Analysis is a tool used to determine your patient's genetic potential This analysis is very similar to the Pont's Index, but has two major advantages over Pont's First, the ability to determine the patient's division; second, there are no difficult conversation factors. The Schwarz-Korkhaus Analysis is an exellent device for chairside evaluation or cast analysis.

This design features a finely serrated band pusher on one end, all purpose scaler on opposite end.

Used to condition high prescription points, the Lurbicant is resistant to heat oxidation. Low toxictty, and low skin sensitization.

Round and concave beaks are hardened stainless steel and have fine, smooth finish. Bends round or rectangular wire with firm grip but will not nick wire. Up to .028.

For crimping stops or tubes on wires.

Grooved tips and curved beaks allow easy access to stops in distal areas.

Serrated tips hold wires firmly at a convenient working angle. Tapered beaks fit easily between brackets and hard to reach areas. Our most popular utility plier.

Lightweight stainless steel. Measures round and rectangular wire with gauge and inch sizes. The only devices which helps to verify sizes and maintain quality control.

X-Heavy duty Wire Cutter cuts all archwires and retainer wires up to .060" excellent tab plier for heavy retainer wires.